heirrmu

News Center

The company adheres to the tenet of "Seek Quality and Dedicated Service"

Check category
>
>
Technical knowledge

News Center

07-07

You can enjoy the customization of hydraulic lifting platform manufacturers

Hydraulic lifting platform is a multi-functional lifting and loading mechanical equipment. Hydraulic lifting platform is divided into: four-wheel mobile lifting platform, two-wheel traction lifting platform, car modified lifting platform, hand-pushing lifting platform, hand-cranking lifting platform, AC and DC dual-purpose lifting platform, battery-mounted lifting platform , The highest point of lifting varies from 1 meter to 30 meters. Features: 1. The whole machine has light weight and good maneuverability, suitable for single-person operation; 2. The special guide wheel device between the masts can rise and fall smoothly; 3. Compact structure, small size in transportation state, can enter the car of general elevator and can smoothly pass through door openings and narrow passages; 4. The multi-protection outrigger structure makes the work safer and safer, and it can be lifted close to the working surface; The double-pillar aluminum alloy elevator is a new-generation product with a new design. The whole is refined with high-strength aluminum profiles. The high profile strength makes the deflection and swing of the lifting platform smaller. It adopts double-mast structure, large load capacity, large platform area, good stability, flexible operation and convenient implementation. With its light appearance, it can exert the highest lifting capacity in a small space. The lift is widely used in factories, hotels, buildings, shopping malls, stations, airports, stadiums, etc. It can be used for high-altitude operations such as installation and maintenance of power lines, lighting appliances, overhead pipelines, and high-altitude cleaning. principle: The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the cylinder through the oil filter, explosion-proof electromagnetic reversing valve, throttle valve, hydraulic control check valve, and balance valve, so that the piston of the cylinder moves upward and lifts the weight. The oil return from the upper end of the hydraulic cylinder is returned to the fuel tank through the flameproof electromagnetic reversing valve, and its rated pressure is adjusted by the overflow valve, and the reading value of the pressure gauge is observed through the pressure gauge. The piston of the hydraulic cylinder moves downward (not only the weight drops). The hydraulic oil enters the upper end of the cylinder through the explosion-proof electromagnetic reversing valve, and the return oil from the lower end of the cylinder returns to the tank through the balance valve, hydraulic control check valve, throttle valve, and explosion-proof electromagnetic reversing valve. In order to make the heavy objects fall smoothly and the brakes are safe and reliable, a balance valve is installed on the oil return line to balance the circuit and maintain the pressure so that the descending speed will never change due to the weight. The throttle valve adjusts the flow rate and controls the lifting speed. In order to make the brake safe and reliable, and prevent accidents, a hydraulic control check valve, namely hydraulic lock, is added to ensure that it can lock itself safely when the hydraulic pipeline bursts accidentally. An overload sound-activated alarm is installed to distinguish overload or equipment failure. The electrical control system controls the rotation of the motor through the explosion-proof buttons SB1—SB6, the reversal of the flame-proof electromagnetic directional valve to keep the load rising or falling, and the time delay is adjusted through the "LOGO" program to avoid frequent starting of the motor Thus affecting the service life.
07-07

Share the safe operation rules of hydraulic lifting platform

Safety operation rules of hydraulic lifting platform: One purpose: This regulation is used to guide the operator in the correct operation and use of hydraulic lifting platform equipment. Two operating procedures: 1. Carefully check the parts of the lifting platform before work, focusing on checking whether the screw connection is reliable, Whether the hydraulic pipeline components are leaking, whether the wire contacts are loose or damaged, etc. 2. Before the lifting platform is raised or lowered, the four-corner outriggers should be properly supported. The four outriggers should be firmly supported On the ground, adjust the work surface to a horizontal state (visual inspection is sufficient). Turn on the power, the indicator light should be on. Then start the motor, the oil pump works, and lift it once or twice under no load, and then start to work after checking that all parts are operating normally. When the temperature is lower than 10℃, the oil pump should be operated for 3-5 minutes, and the operation can be carried out after confirming that the oil pump is working normally. 3. After entering the platform, the operator should close the guardrail door, insert the bolt, and fasten the safety rope. The center of the load (the position where the person can stand) should be as close as possible to the center of the work surface. 4. Lifting and lowering: Press the "lift" button to start the motor, the motor rotates, the hydraulic system works, the cylinder extends, and the platform rises; when it reaches the height required for work, press the motor "stop" button, the platform stops lifting , You can work. If you don't press the "stop" button, when the platform rises to the calibration height (the machine is 8 meters), the travel switch will work and the platform will stop at the calibration height. After the work is finished, press the "down" button, the solenoid valve will act. At this time, the oil return of the oil cylinder is connected, and the platform is lowered by its own weight. 5. It is strictly forbidden to overload the hydraulic platform (the rated load of this machine is 300 kg), and the operating personnel on the platform are not allowed to move during the lifting and lowering process. 6. When moving or towing the hydraulic platform, the support legs should be stowed and the platform should be lowered to the lowest position. It is strictly forbidden to move the platform when the operator is in a high position. 7. When the platform fails to work normally, the power supply should be cut off in time for maintenance. It is strictly forbidden to operate the equipment with diseases. Non-professionals should not disassemble hydraulic and electrical components. 8. Do not use the machine when the ground is unstable; do not lift the platform when the platform is not stable, the outriggers are not adjusted, leveled, and the ground is not secure; 9. Do not adjust or retract the outriggers when there are people on the platform or when it is raised; 10. Do not move the machine when the platform is raised. If you need to move, please shrink the platform first and relax your legs; 11. Do not use this machine to lift goods or equipment, this machine is limited to carrying people and tools; 12. Do not conduct outdoor work under strong wind conditions; 13. Do not push or pull objects outwards during operation; 14. Do not sit, lie, stand or climb on the platform guardrail; 15. It is strictly forbidden to stand people or pile up debris under the lifting platform; 16. Do not use this machine as the grounding of electric welding center line; 17. Do not use this machine under all foreseeable dangerous conditions. 18. Mast type series lifts, the rated load includes people and carry items, so please do not overload; 19. The level must be adjusted before use, otherwise it cannot be used; 20. The elevator is not allowed to move or adjust the base during work; 21. It is not allowed to climb or stand on the guardrail of the manned platform; 22. It should be used on a solid and flat ground, and it is never allowed to use it on a temporarily erected platform, truck (truck, truck, uncovered car), bed or extended surface; 23. When the lift is working, no load is allowed to touch the side to prevent accidents; 24. The feet are as soft as the ground, so make firm stows and adjust them properly; 25. When the lift is working, no people are allowed to stand under the manned frame; 26. The mast-type lift cannot be used tilted, and when it is used close to a high wall, the lifting height shall not be greater than the height of the high wall; 27. The driver must carefully check whether the electrical system, hydraulic system and mechanical system of the platform are normal before working every day, and run the platform without load for several times to check for faults and abnormal phenomena, and pay attention to the platform stop. Whether there is a significant abnormal gap in the accuracy of the landin
07-07

Our scissor lift platform wholesale customization

Scissor lifting platform is a kind of vertical lifting, a wide range of indoor and outdoor special equipment for high-altitude operations. It can be widely used in equipment maintenance, station, wharf, bridge, hall, factory indoor and outdoor mechanical installation, equipment maintenance, building maintenance. Features: Scissor lift platforms are mainly used in the logistics industry, production lines, the lifting, loading and unloading of goods from basement to floors, and can also be used for lifting stages, lifting consoles, etc. The product has a stable structure, low failure rate, reliable operation, safe and efficient, simple and convenient maintenance. The fixed lifting platform can be equipped with accessory devices according to the requirements of use to make a given combination, such as the safety protection device of the lifting platform, electrical control mode, working platform form, power form, walking drive mechanism, etc. When using the lifting platform, pay attention to the correct selection of various configurations to maximize the functions of the lifting platform and achieve the best use effect. classification: The scissor lift platform is divided into: mobile, fixed, and traction. The lifting power of the mobile platform is manual or electric, and the product has a stable structure, flexible movement, stable lifting, convenient operation, and large load capacity. use: The traction lifting platform uses external power for traction, using three-phase power or diesel engine as power, convenient and quick to move, suitable for long-distance operations, and mainly used for field high-altitude operations in petroleum, electric power, urban construction, post and telecommunications industries. The mobile lifting platform is a special equipment for high-altitude operations with a wide range of uses. Its scissor mechanical structure enables the lifting platform to have relatively high stability. The large working platform and relatively high load-bearing capacity make the range of high-altitude operations larger and larger, and it is suitable for other operations by many people. It makes high-altitude operations more efficient and safer. It is mainly used for mechanical installation, equipment maintenance, and building maintenance in stations, wharves, bridges, halls, and workshops. The fixed lifting platform is a kind of cargo lifting equipment with good lifting stability and a wide range of applications. It is mainly used for the transportation of goods between the height difference of the production line; the material is on-line and off-line; the highest point of the workpiece is adjusted when the workpiece is assembled; Machine feeding; parts lifting during assembly of large equipment; loading and unloading of large machine tools; storage and loading places and forklifts and other handling vehicles supporting fast cargo loading and unloading, etc.
Previous page
1
2
4
订购

Order

Strict quality control

快速发货

Fast delivery

Dedicated transportation

服务

Service

24 hours to answer you

Zhejiang Heirrmu Mechanical and Electrical Equipment Manufacturing Co.,Ltd

We sincerely look forward to cooperating with customers sincerely, and returning customers' satisfactory quality and service.

7X24 National Customer Service Phone

Home         |          Machinery Products         |          Rental service         |          News         |          FAQ         |          About us         |          Contact us

COPYRIGHT © 2020 Zhejiang Heirrmu Mechanical and Electrical Equipment Manufacturing Co., Ltd 浙ICP备20018077号