Zhejiang Hanmu Electromechanical Equipment Manufacturing Co., Ltd. plans to apply for the completion and acceptance of environmental protection facilities

2020-07-07

According to the environmental protection laws and policies of the construction project, the completion acceptance status of the environmental protection facilities of the newly added stacker spraying line of Zhejiang Ham Electromechanical Equipment Manufacturing Co., Ltd. is announced as follows: 1. Project name: Zhejiang Hanmu Electromechanical Equipment Manufacturing Co., Ltd. newly added stacker truck spray line supplement project 2. Construction unit: Zhejiang Hanmu Mechanical and Electrical Equipment Manufacturing Co., Ltd. 3. Construction site: No. 65, Zhijiang Road, Haining Agricultural Development Zone 4. Construction content: Completion and acceptance of the new stacker spraying line re-organization project of Zhejiang Hanmu Electromechanical Equipment Manufacturing Co., Ltd. V. Implementation of environmental protection: overall coordination of pollutant compliance and total amount control 6. Acceptance monitoring results: In November 2016, Hangzhou Bosheng Environmental Protection Technology Co., Ltd. conducted on-site monitoring of the new stacker truck spraying line reissue project of Zhejiang Ham Electromechanical Equipment Manufacturing Co., Ltd., and compiled a completed environmental protection acceptance monitoring report (form) (document number) ). According to the monitoring, the main results of the completed environmental protection acceptance monitoring report are as follows: (1) Working conditions during the monitoring period: normal operation of the equipment (2) Wastewater: (1) Clean and sewage diversion, rain and sewage diversion. (2) Domestic sewage is pretreated by septic tanks and discharged into the municipal sewage pipe network. (3) Exhaust gas: meet the emission standard of "Industrial Furnace Air Pollutants Emission Standard" (GB9078-1996), and have no impact on the surrounding environment (4) Noise: Hangzhou Bosheng Environmental Protection Technology Co., Ltd. conducted a noise value measurement (equipment normal operation) around the project plant boundary on January 19 (14:00-15:00) and found that the noise value around the plant boundary was average It can meet the requirements of Class 3 standard limits in the "Acoustic Environmental Quality Standard" (GB3096-2008). (5) Solid waste: 1. Comprehensive utilization by relevant enterprises for takeaway after collection 2. The transportation and sanitation department will be cleared and handled uniformly (6) Total amount control: The main pollutants included in the total amount control in the pollution factors emitted by this project are CODCr and NH3-N. According to the "Approval Measures for the Total Access of Major Pollutants for Construction Projects in Zhejiang Province (Trial)": New, reconstruction, and expansion projects do not discharge production wastewater, and the main water pollutants discharged only originate from domestic wastewater discharged from independent living areas in the plant Yes, its new chemical oxygen demand and ammonia nitrogen can be reduced without regional substitution. Since the sewage treatment plant discharge standard in Haining area has been upgraded to Level 1 A, after the implementation of this project, the total recommended values ​​of CODCr and ammonia nitrogen are 0.0675 t/a and 0.00675 t/a respectively, and there is no need to carry out total regional substitution reduction. The SO2 and NOx control values ​​are 0.00085t/a and 0.102t/a, respectively, and the required doses are 0.0017t/a and 0.204t/a respectively. The total amount is adjusted and balanced throughout Haining City. Publicity time: April 26-April 30, 2017 (5 working days in total) If the public has comments and suggestions on the construction project, they can report to the following units within the publicity period. Please leave your contact information (name, address, phone number or email) in response to questions in order to get answers and feedback in time. Haining Environmental Protection Bureau, Tel: 12369; High-tech Zone, Chang'an Town, Tel: 87429016; Jiaxing Zhongyi Testing and Research Institute Co., Ltd., Tel: 0573-82808856, Fax: 0573-82082121. Construction unit: Zhejiang Hanmu Mechanical and Electrical Equipment Manufacturing Co., Ltd. Date: April 26, 2017

112th Canton Fair

2020-07-07

112th Canton Fair

You can enjoy the customization of hydraulic lifting platform manufacturers

2020-07-07

Hydraulic lifting platform is a multi-functional lifting and loading mechanical equipment. Hydraulic lifting platform is divided into: four-wheel mobile lifting platform, two-wheel traction lifting platform, car modified lifting platform, hand-pushing lifting platform, hand-cranking lifting platform, AC and DC dual-purpose lifting platform, battery-mounted lifting platform , The highest point of lifting varies from 1 meter to 30 meters. Features: 1. The whole machine has light weight and good maneuverability, suitable for single-person operation; 2. The special guide wheel device between the masts can rise and fall smoothly; 3. Compact structure, small size in transportation state, can enter the car of general elevator and can smoothly pass through door openings and narrow passages; 4. The multi-protection outrigger structure makes the work safer and safer, and it can be lifted close to the working surface; The double-pillar aluminum alloy elevator is a new-generation product with a new design. The whole is refined with high-strength aluminum profiles. The high profile strength makes the deflection and swing of the lifting platform smaller. It adopts double-mast structure, large load capacity, large platform area, good stability, flexible operation and convenient implementation. With its light appearance, it can exert the highest lifting capacity in a small space. The lift is widely used in factories, hotels, buildings, shopping malls, stations, airports, stadiums, etc. It can be used for high-altitude operations such as installation and maintenance of power lines, lighting appliances, overhead pipelines, and high-altitude cleaning. principle: The hydraulic oil forms a certain pressure by the vane pump, and enters the lower end of the cylinder through the oil filter, explosion-proof electromagnetic reversing valve, throttle valve, hydraulic control check valve, and balance valve, so that the piston of the cylinder moves upward and lifts the weight. The oil return from the upper end of the hydraulic cylinder is returned to the fuel tank through the flameproof electromagnetic reversing valve, and its rated pressure is adjusted by the overflow valve, and the reading value of the pressure gauge is observed through the pressure gauge. The piston of the hydraulic cylinder moves downward (not only the weight drops). The hydraulic oil enters the upper end of the cylinder through the explosion-proof electromagnetic reversing valve, and the return oil from the lower end of the cylinder returns to the tank through the balance valve, hydraulic control check valve, throttle valve, and explosion-proof electromagnetic reversing valve. In order to make the heavy objects fall smoothly and the brakes are safe and reliable, a balance valve is installed on the oil return line to balance the circuit and maintain the pressure so that the descending speed will never change due to the weight. The throttle valve adjusts the flow rate and controls the lifting speed. In order to make the brake safe and reliable, and prevent accidents, a hydraulic control check valve, namely hydraulic lock, is added to ensure that it can lock itself safely when the hydraulic pipeline bursts accidentally. An overload sound-activated alarm is installed to distinguish overload or equipment failure. The electrical control system controls the rotation of the motor through the explosion-proof buttons SB1—SB6, the reversal of the flame-proof electromagnetic directional valve to keep the load rising or falling, and the time delay is adjusted through the "LOGO" program to avoid frequent starting of the motor Thus affecting the service life.

Share the safe operation rules of hydraulic lifting platform

2020-07-07

Safety operation rules of hydraulic lifting platform: One purpose: This regulation is used to guide the operator in the correct operation and use of hydraulic lifting platform equipment. Two operating procedures: 1. Carefully check the parts of the lifting platform before work, focusing on checking whether the screw connection is reliable, Whether the hydraulic pipeline components are leaking, whether the wire contacts are loose or damaged, etc. 2. Before the lifting platform is raised or lowered, the four-corner outriggers should be properly supported. The four outriggers should be firmly supported On the ground, adjust the work surface to a horizontal state (visual inspection is sufficient). Turn on the power, the indicator light should be on. Then start the motor, the oil pump works, and lift it once or twice under no load, and then start to work after checking that all parts are operating normally. When the temperature is lower than 10℃, the oil pump should be operated for 3-5 minutes, and the operation can be carried out after confirming that the oil pump is working normally. 3. After entering the platform, the operator should close the guardrail door, insert the bolt, and fasten the safety rope. The center of the load (the position where the person can stand) should be as close as possible to the center of the work surface. 4. Lifting and lowering: Press the "lift" button to start the motor, the motor rotates, the hydraulic system works, the cylinder extends, and the platform rises; when it reaches the height required for work, press the motor "stop" button, the platform stops lifting , You can work. If you don't press the "stop" button, when the platform rises to the calibration height (the machine is 8 meters), the travel switch will work and the platform will stop at the calibration height. After the work is finished, press the "down" button, the solenoid valve will act. At this time, the oil return of the oil cylinder is connected, and the platform is lowered by its own weight. 5. It is strictly forbidden to overload the hydraulic platform (the rated load of this machine is 300 kg), and the operating personnel on the platform are not allowed to move during the lifting and lowering process. 6. When moving or towing the hydraulic platform, the support legs should be stowed and the platform should be lowered to the lowest position. It is strictly forbidden to move the platform when the operator is in a high position. 7. When the platform fails to work normally, the power supply should be cut off in time for maintenance. It is strictly forbidden to operate the equipment with diseases. Non-professionals should not disassemble hydraulic and electrical components. 8. Do not use the machine when the ground is unstable; do not lift the platform when the platform is not stable, the outriggers are not adjusted, leveled, and the ground is not secure; 9. Do not adjust or retract the outriggers when there are people on the platform or when it is raised; 10. Do not move the machine when the platform is raised. If you need to move, please shrink the platform first and relax your legs; 11. Do not use this machine to lift goods or equipment, this machine is limited to carrying people and tools; 12. Do not conduct outdoor work under strong wind conditions; 13. Do not push or pull objects outwards during operation; 14. Do not sit, lie, stand or climb on the platform guardrail; 15. It is strictly forbidden to stand people or pile up debris under the lifting platform; 16. Do not use this machine as the grounding of electric welding center line; 17. Do not use this machine under all foreseeable dangerous conditions. 18. Mast type series lifts, the rated load includes people and carry items, so please do not overload; 19. The level must be adjusted before use, otherwise it cannot be used; 20. The elevator is not allowed to move or adjust the base during work; 21. It is not allowed to climb or stand on the guardrail of the manned platform; 22. It should be used on a solid and flat ground, and it is never allowed to use it on a temporarily erected platform, truck (truck, truck, uncovered car), bed or extended surface; 23. When the lift is working, no load is allowed to touch the side to prevent accidents; 24. The feet are as soft as the ground, so make firm stows and adjust them properly; 25. When the lift is working, no people are allowed to stand under the manned frame; 26. The mast-type lift cannot be used tilted, and when it is used close to a high wall, the lifting height shall not be greater than the height of the high wall; 27. The driver must carefully check whether the electrical system, hydraulic system and mechanical system of the platform are normal before working every day, and run the platform without load for several times to check for faults and abnormal phenomena, and pay attention to the platform stop. Whether there is a significant abnormal gap in the accuracy of the landin