Share the introduction of electric lift classification

(1) According to the different structure of electric elevator, it can be divided into: scissor type, sleeve cylinder type, aluminum alloy (column) type, crank type, chain type Scissor Introduction: Scissor electric lift is a special equipment for high-altitude operations with a wide range of uses. Its scissor-type mechanical structure enables the lifting platform to have a relatively high stability after being raised. The large working platform and relatively high load-bearing capacity make the range of high-altitude operations larger and larger, and it is suitable for other operations by many people. . It makes high-altitude operations more efficient and safer. It is a special equipment for aerial work with a wide range of uses. Features: The lifting mechanism is made of high-strength manganese steel huge tube. Equipped with safety protection device to prevent overload of the elevator. Equipped with a safety protection valve to prevent the hydraulic pipeline from rupturing. Equipped with emergency lowering device in case of power failure. The product is suitable for mobile high-altitude operations such as installation and maintenance of high-altitude equipment in various industries. Different power forms can be selected according to different requirements (such as three mutual AC power supply, DC AC power supply, DC power supply and internal combustion power, etc.), plus a manual hydraulic device, which can work as usual when power is cut or without power, and can be extended and retracted The platform can be extended to the required position when the length of the platform is insufficient, thereby improving work efficiency. It is an ideal equipment product for modern tall buildings and equipment, and is a must for safe and civilized production at high altitude. Uses: Suitable for large-scale continuous high-altitude operations such as airport terminals, aircraft repairs, stations, docks, shopping malls, stadiums, residential properties, factories and mines. Some products have the function of manual walking, which can walk quickly and at low speed under different working conditions. Only one person in the air can operate the machine to continuously complete up and down, forward, backward, and turn movements. When the machine is in a stopped state, the wheels are still in a braking state and can be reliably braked on a 6-degree slope. The large-diameter, super-wide, high-quality rubber wheels enable users to effectively protect the ground while increasing braking friction. Cylinder type Introduction: The cylinder-cylinder electric lift is a multi-stage hydraulic cylinder that rises upright. The high-strength material and good mechanical properties of the hydraulic cylinder, and the tower-shaped ladder-shaped guard frame make the lifting platform more and more stable. Even if you are at an altitude of 20 meters, you can feel its superior stability. Features: The cylinder-cylinder electric lift is a multi-stage hydraulic cylinder that rises upright. The high-strength material and good mechanical performance of the hydraulic cylinder, and the tower-shaped ladder-shaped guard frame make the lift more and more stable. Even if you are at an altitude of 20 meters, you can feel its superior stability. Brand-new design, double ladder anti-rotation structure, double speed descent system, the maximum height of 35 meters, stability, reliability, beautiful appearance, and easy operation are the most important characteristics of the cylinder electric elevator. Power options: AC 220V (standard configuration), AC 380V power supply, DC power supply, hand pump. Purpose: The most common is also the most practical. Ascending operations may not be troublesome. It is widely used in stations, factories, hotels, buildings, shopping malls, airports, stadiums, docks, hotels, airports and all kinds of occasions that require climbing operations. Aluminum alloy type Brief introduction: The whole is refined with high-strength aluminum profile, which is due to the high strength of the profile. It has the advantages of beautiful appearance, small size, light weight, compact structure, convenient movement, stable lifting platform, convenient operation, safety and reliability, etc., making aerial work more and more Convenient and fast, able to walk fast and at low speed, and adjustable speed, it is the ideal high-altitude operation equipment for the effective and safe production of modern enterprises. It can be divided into single-pillar aluminum alloy, double-pillar aluminum alloy, three-pillar and four-pillar aluminum alloy. Features: Using high-strength and high-quality aluminum alloy material, it has the advantages of beautiful appearance, small size, light weight, stable lifting, safety and reliability. With its light appearance, it can exert the highest lifting capacity in a small space. The column lifting system has the characteristics of large capacity, strong stability, large platform area and convenient implementation

Share the introduction of our aerial work platform rental service

We focus on leasing business No big money needed Investment in leasing equipment does not require a large sum of money, and the money can be used where investment is more needed Reduce idle time Lease only when you need it, pay it back when you don’t need it No maintenance cost Maintenance costs are included in the rent, no need to purchase spare parts, no maintenance workshops and spare parts inventory, no regular maintenance, no monthly depreciation costs No big money needed You don’t need to invest large sums of money to invest in leasing equipment, and you can use the money in places that require more investment to reduce idle time. Leasing is only rented when you need it, and you don’t need to pay it back. Old cost The only cost per month is rent, no other carrying costs No placement cost There is no need to invest in the site fee for leasing, and no need to pay any site maintenance fees. No disposal costs Leasing does not need to worry about how to sell the equipment before the end of its useful life, including equipment cleaning, advertising and meeting buyers, etc. The right equipment Lease ensures that you find the right equipment needed for the job so that the job is done safely and properly More accurate cost accounting The only cost of leasing is rent, thus simplifying the work of bidding, spending expenses and preparing accounts The advantages of the empty work platform: Simple operation, complete procedures, high work efficiency, large operating radius, fast transfer speed, flexible lease period (daily rent, weekly rent, monthly rent, annual rent), the rent is lower than similar products, the safety factor is high, and the working conditions are restricted Because of its few advantages, it is unanimously recognized by many high-altitude users. Currently available vehicle heights: 3 meters, 4 meters, 6 meters, 7.5 meters, 9 meters, 11 meters, 12 meters. Applicable scope: Exterior wall repair, installation, painting, transformation, LED billboard installation, monitoring installation, equipment installation, flagpole maintenance, street lamp maintenance, viaduct spraying, downpipe installation, film and television shooting, road and bridge tunnel gas station inspection and maintenance, glass curtain wall installation, cleaning, smoke Halogen anticorrosion, maintenance of high pole lights, tree pruning, plant fire equipment installation, steel structure installation, industrial equipment installation, high-speed rail and light rail maintenance, high-altitude rescue, factory scene shooting, etc. Maintenance of stadiums and exhibition venues.

Precautions for the selection and operation of stackers

One, the choice of stacker Stacker trucks are mainly used for stacking shelves and lifting goods. Stacker trucks are classified into full-electric stackers, semi-electric stackers, manual stackers, pedal stackers, and hand-operated stackers according to their usage methods. Users can choose suitable models according to their needs. The load-bearing capacity of the stacker is generally 0.1 to 1.5 tons, and the width of the working channel is generally 2.3 to 2.8 meters. In terms of structure, it has more mast than the electric pallet handling forklift. The fork lift height of the stacker is generally within 4.5 meters; 2. The operating procedures of the stacker truck: 　　　 1. The operator of the stacker must be familiar with the general structure and performance of the equipment, and it is strictly forbidden to use the equipment with super performance. 2. Daily inspection of the following items of the stacker: (1) Check the control and driving devices of the stacker, if they are damaged or defective, they should be repaired; 　　 (2) Check the stacker's roof guard, shelf, various switches, operating handles, pedals, wheels and fasteners; 　　 (3) Keep the proper starting speed when the stacker is started. Pay attention to the voltage of the voltmeter. If it is lower than the limit voltage, the forklift should stop running immediately. Pay attention to whether the sound of the drive system and the steering system is normal. If the abnormal sound of the stacker is found, troubleshoot in time and strictly prohibit working with diseases. 　　 (4) The load should not exceed the specified value when the stacker is moving, the forks must be inserted under the cargo, and the cargo should be evenly placed on the forks, and no single fork tip is allowed to pick objects; 　　 (5) The stacker shall start, turn, drive, brake and stop smoothly, and slow down when turning on wet or slippery roads; 　　 (6) The driving and lifting of the stacker should not be carried out at the same time, 　　 (7) Pay attention to pedestrians, obstacles and potholes when driving a stacker; no people are allowed to stand on the forks, and no people are allowed on the truck; 　　 (8) People are not allowed to stand or walk under the forks; do not carry unfixed or loosely stacked goods, be careful to carry large-sized goods; do not exceed the maximum load of the forklift during exercise 　 　　 (9) Under normal circumstances, the stacker cannot operate the walking motor and the hoisting motor at the same time, otherwise the battery discharge current will be too large, which will reduce the efficiency and affect the service life; (10) Do not allow the stacker truck to be charged until the forklift cannot be moved. This will shorten the battery life; the battery contains high voltage and energy. Do not allow tools to approach the battery poles to avoid sparks or short circuits; When the forklift is traveling, it is not allowed to flip the direction switch to change the traveling direction to prevent burning of electrical components and damage to the gears.